|
ARITA GATE VALVE
A Gate Valve also known as sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid.
Typical gate valves should never be used for regulating flow unless they are specifically designed for that purpose. On opening the gate valve, the flow is enlarged in a highly non-linear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Typical gate valves are designed to be fully open or closed. Gate valves
are characterised as having either a rising stem or non-rising stem. Rising stems provide a visual indication of valve position. Non-rising stems are used where vertical space is limited or underground.
 |
CAST IRON BODY
- Series ARGA6 - ARGA7
- Flanged End ANSI 150LB
- Series ARGA1 - ARGA2
- Flanged End JIS 10K
|
ARGA6 - ARGA7
 Download pdf
ARGA1 - ARGA2
Download pdf
|
|
 |
SS304 - SS316 BODY
- Series SVGA35 - SVGA31
- Flanged End ANSI 150LB
- Series SVGA34 - SVGA30
- Flanged End JIS 10K
|
SVGA35 - SVGA31
Download pdf
SVGA34 - SVGA30
Download pdf
|
|
 |
CAST STEEL BODY
- Series ARGA - ANSI 150 to 600LB
- Bolted Bonnet - OS&Y - Rising Stem - Flexible Wedge
- A216 WCB Body - Wedge WCB + 13% Cr
- Design conform to API600, BS1414, ANSI B16.34
- Flange Dimension ANSI B16.5 - F-F B16.10
- Testing in accordance with API598 BS EN12266
|
ANSI150-600
Download pdf
|
|
 |
FORGED STEEL BODY
- Series ARF - CL800 - ANSI150-300LB
- Bolted Bonnet - OS&Y - Rising Stem - Rolling Seat Ring
- A105N Carbon Steel - A276 420 Wedge (13% Cr)
- Design conform to API602, BS5352, B16.34
- Threaded B1.20.1 - Socket B16.11
- Flange Dimension ANSI B16.5 - F-F B16.10
- Testing in accordance with API598 BS EN12266
|
CL800
Download pdf
ANSI150-300
Download pdf
|
|
 |
THREADED END
- Series THG101 - SVGA
- Working pressure 200psi
- Brass body
- SS304 - SS316 body
|
THG101
Download pdf
SVGA
Download pdf
|
|
