24, Jalan TS 6/9, Taman Industri Subang
47510 Subang Jaya, Selangor
T : 03 - 5621 8811
F : 03 - 5621 3278
24, Jalan TS 6/9, Taman Industri Subang
47510 Subang Jaya, Selangor
T : 03 - 5621 8811
F : 03 - 5621 3278
A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it.
MORE
A butterfly valve can be used for isolating or regulating flow. The closing mechanism takes the form of a disk.
MORE
A check valve, non-return valve, or one-way valve is a valve that normally allows fluid to flow through it in only one direction.
MORE
the valve's sealing surfaces between the gate and seats are planar, so are often used in a straight-line flow of fluid.
MORE
a type of valve used for regulating, directing, or controlling the flow in a pipeline.
MORE
Y strainers are devices for mechanically removing solids from fluid by means of a perforated or wire mesh straining element.
MORE
Needle valve uses a tapered pin to gradually open a space for fine control of flow. It is controlled and regulated by the use of a spindle.
MORE
designed to safely absorb the heat-induced expansion, to absorb vibration, or to allow movement.
MORE
Pressure Reducing Valve (PRV) is to reduce high incoming pressure to lower desire set pressure.
MORE
A valve that stop a liquid to or from a tank and regulated by a float on the surface of the liquid within the tank.
MORE
An automatic device that used to discharge condensate and non-condensable gasses without loss of live steam.
MORE
positioners are used to ensure the valve attains the desired degree of opening by the input of 4-20 mA.
MORE24, Jalan TS 6/9,
Taman Industri Subang
47510 Subang Jaya,
Selangor
Telephone: +603 5621 8811
Fax: +603 5621 3278
Email: enquiry@ttsvalve.com
2017 TTS Valve Technologies Sdn Bhd © All Rights Reserved
